Sabatti Tactical MRR Chromed
Calibre: .308 Win
Barrel Length: 26"
Type: Rifle
Mechanism: Bolt Action
Tactical Target Rifle, Synthetic Stock & Chromed Screw Cut Barrel With Multi Radial Rifling Technology (MRR)
License: FAC
Condition: New

Information

• Target bolt-action rifle for precision long distance shooting.
• Overboared barrels – between 22 and 27 mm at the muzzle.
• A more rigid shot – vibrations at higher frequency but lower range so as to reduce shot pattern dispersion on target.
• Our barrels are less subject to temperature increases to begin with. That combined with the final stress relief process they undergo reduces shot group dispersion on target to the minimum. It is the vibration barrels develop when they overheat and the release of residual tensions that causes the dispersion.
• Barrels in Chrome Molybdenum Steel: The Chrome and Molybdenum added to the steel substantially improve its resistance to the wear generated by the incandescent ammunition especially to the first part of the rifling over that of traditional carbon steel.
• The bars of steel we use are all induction treated at the steel mill which then translates into a longer life cycle of our barrels.
• Cold hammer forging: We rifle all our barrels by cold deformation rather than simply by subtractive manufacturing, which results in improved dimensional consistency and allows us to use steels with better mechanical characteristics (harder).
• Our frames and bolts are machined from solid blocks of high-resistance steel alloys. They undergo tailored heat treatments to optimize strength and durability.
• Our frames undergo a Neutral Hardening Process to achieve strength and resistance. After this is complete, the areas in the frames subject to the highest levels of stress undergo additional spot hardening.
• Our bolts with two front lugs undergo a case hardening and subsequent hardening operation which increases surface hardness and fatigue strength by creating a hardened surface layer and a hard core.
• The rifle comes with a stock in high resistance Nylon charged with fiberglass to increase strength and reduce the risk of breakage. On request a fully adjustable cheek piece can be installed at the factory (up and down and left and right).
• Spacers to be positioned before the rubber recoil pad to adjust stock length are also available on request.
• Accessories On request we provide Picatinny rails entirely machined from solid billets of steel. They come with either 0MOA, 20MOA or 30MOA depending on the required shooting distance

This item is classed as a restricted item as it falls under UK licensing or age restriction laws. For this reason there is no 'Buy' button so it can't be sold online and must therefore be an in-store purchase or RFD transfer. To find out more about this item, either:
· Phone us on 01249 893120
· Email us on sales@dauntseyguns.co.uk
· Or simply pop in and see us, click to find out where we are

- GID-8346 - R65854