Personalized Ballistic Cam
It’s often the small things that make life easier for you, and this is also true in hunting. Inspired by this principle, SWAROVSKI OPTIK has developed a new, personalized ballistic cam (PBC) for all its rifle scopes that are equipped with a ballistic turret. The ballistic cam makes longrange shooting even easier. You can very quickly create your personally engraved cam for the SWAROVSKI OPTIK ballistic turret. First of all, use the ballistic program available at
ballisticprogram.swarovskioptik.com to calculate all the values that you need for your rifle scope.
Engraving options
The required sight-in distance is always shown as a 3-digit number. You also have the following engraving options:
1. A long line marks every 50 m/yds, and a number marks every 100 m/yds (e.g. 3 = 300 m/yds).
2. In addition to the first option, you can choose to have a short line that marks every 25/75 m/yds from 300 m/yds.
3. This option is the same as option 1, but in addition to the markings at 50 and 100 m/yds, every single click is engraved as a short line.
4. You can also limit the desired maximum shooting distance. This means that there will be no more lines engraved from this distance onward.
Order process
Based on the analysis of your personal specifications given by the ballistic program, your SWAROVSKI OPTIK retailer will order the required cam with your preferences engraved on it. You can easily and quickly attach your personalized ballistic cam to your rifle scope, without any need to sight in the firearm again. You can of course switch to the standard system that uses the rings at any time.
How to order your PBC:
Go to
ballisticprogram.swarovskioptik.com.
Choose your basic settings, click on start and choose your rifle scope. Click on the PBC underneath the reticles on the right hand side.
Go through the configuration process. Everything is explained step-by-step. Please make sure that all data you enter is correct. Wrong configured PBCs cannot be exchanged.
TIP: Measure the actual muzzle velocity for your weapon/ammunition combination so that you can ensure total accuracy for the sight-in distances selected.
At the end of the configuration process you’ll receive an order number Please print the pdf document or write down the order number. The order number is not your order configuration!
Bring your order number to dauntsey Guns. We will take care for the order of your PBC for you.
Your PBC will be sent to your retailer. Please fetch and pay for it there.
If you have any questions or need advice please contact our customer service:
customerservice@swarovskioptik.com or ask an exclusive specialist retailer for help.